Tools

Optimum life and performance when used with rotary pistol drills or drill pressesUp to 16.5mm can be used on impact wrench & impact drivers for fast cutting performanceSuitable for harder materials such as stainless steel when used at reduced RPMUse appropriate lubrication and correct RPM to achieve long tool life

Optimum life and performance when used with rotary pistol drills or drill pressesUp to 16.5mm can be used on impact wrench & impact drivers for fast cutting performanceSuitable for harder materials such as stainless steel when used at reduced RPMUse appropriate lubrication and correct RPM to achieve long tool life

Optimum life and performance when used with rotary pistol drills or drill pressesUp to 5/8" can be used on impact wrench & impact drivers for fast cutting performanceSuitable for harder materials such as stainless steel when used at reduced RPMUse appropriate lubrication and correct RPM to achieve long tool life

Size refers to the finished hole sizeTapers from 4.4mm108mm OALFor fastest performance use on impact wrenches & impact driversImpact driven reamers are not recommended for Flame or Plasma cut holesUse with a Magnet DrillReamer should be rotating before starting the cut & steady feed pressure should be used through the cutFor materials thicker than 20mm use of ImpactaMag reamers is recommended

3pc Set in Kit CaseFor fastest performance use on impact wrenches & impact driversImpact driven reamers are not recommended for Flame or Plasma cut holes. Use with a Magnet DrillReamer should be rotating before starting the cut & steady feed pressure should be used through the cutFor materials thicker than 20mm use of ImpactaMag reamers is recommended

5pc SetFor fastest performance use on impact wrenches & impact driversImpact driven reamers are not recommended for Flame or Plasma cut holesUse with a Magnet DrillReamer should be rotating before starting the cut & steady feed pressure should be used through the cutFor materials thicker than 20mm use of ImpactaMag reamers is recommended

For fastest performance use on impact wrenches & impact driversImpact driven reamers are not recommended for Flame or Plasma cut holes, use with a Magnet DrillReamer should be rotating before starting the cut & steady feed pressure should be used through the cutFor materials thicker than 20mm use of ImpactaMag reamers is recommended

For fastest performance use on impact wrenches & impact driversImpact driven reamers are not recommended for Flame or Plasma cut holes, use with a Magnet DrillReamer should be rotating before starting the cut & steady feed pressure should be used through the cutFor materials thicker than 20mm use of ImpactaMag reamers is recommended

20mm shank (AF)

19.05mm Weldon shankLength: 63mmWidth: 34mm

31.75mm Weldon shankLength: 80mmWidth: 34mm

Length: 65mmWidth: 35mm

Length: 75mmWidth: 38mm

Optimum life and performance when used with rotary pistol drillsGood results can be achieved with SDS Drills when used in Rotary Only modeReplace supplied pilot drill with 101030P-0003Saving* ejector pin for use with a Magnet Drill or MultiSinkSuitable for use on Stainless SteelUse appropriate lubrication and correct RPM to achieve long tool life

4.0>6.35x115mm

6.35x115mm

6.35 x 165mm

6.35 x 205mm

Non-slip 11.0mm hex shank is standard on all VersaDrive® tools55mm internal depth of cut on all sizes of holesaw

Non-slip 11.0mm hex shank is standard on all VersaDrive® tools55mm internal depth of cut on all sizes of holesaw

149mm OAL Supplied with one piece arbor and replaceable pilot drill

540 x 390 x 95 (L x W x H mm)

540 x 390 x 95 (L x W x H mm)

L x W x H (mm) 270 x 370 x 95